Figure 31: Removing the 2.5-inch HDD from the 3.5-inch frame (B)
Ê Turn the installation frame round while holding the 2.5-inch HDD in place.
Ê Lift the 2.5-inch HDD out of the 3.5-inch HDD installation frame.
7.3
Replacing SAS / SATA HDD / SSD
backplanes
7.3.1
Replacing the 4x 3.5-inch HDD SAS backplanes
Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.3.1.1
Preliminary steps
"Locating the defective server" on page 51
Ê
"Disabling or suspending BitLocker functionality" on page 69
Ê
"Shutting down the server" on page 53
Ê
RX2540 M1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
Hardware: 10 minutes
125