Removing A 2.5-Inch Hdd/Ssd Module; Installing A 2.5-Inch Hdd/Ssd Module; Concluding Steps; Replacing 2.5-Inch Hdd/Ssd Sas/Sata Backplanes - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

I
For further information, please refer to the "ServerView Suite RAID
Management" user guide and manuals of RAID controller.
7.4.4.2

Removing a 2.5-inch HDD/SSD module

"Removing a 2.5-inch HDD/SSD module" on page 198
Ê
7.4.4.3

Installing a 2.5-inch HDD/SSD module

"Installing 2.5-inch HDD/SSD modules" on page 193
Ê
7.4.4.4

Concluding steps

"Performing a RAID array rebuild" on page 121
Ê
7.5 Replacing 2.5-inch HDD/SSD SAS/SATA
backplanes
7.5.1 Replacing the 8x 2.5-inch HDD/SSD SAS
backplane 1
Field Replaceable Unit
(FRU)
Tools: flat screw driver
Phillips PZ2 / (+) No. 2 screw driver / nut driver 5 mm
7.5.1.1

Preliminary steps

"Locating the defective server" on page 61
Ê
"Suspending BitLocker functionality" on page 95
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
RX2540 M2
Hard disk drives (HDD) and solid state drives (SSD)
Upgrade and Maintenance Manual
Hardware: 15 minutes
201