Step 5. Outputting Measurement Results (Save); Outputting Measurement Results(Save); Outputting Measurement Results - Agilent Technologies ENA Series Installation And Quick Start Manual

STEP 5. Outputting Measurement Results (Save)

You can save not only the internal data but also the measurement results such as trace data
and display screens to the disk .
Saving the Trace Data(in CSV format)
You can save the trace data to the disk of the E5061A/E5062A in CSV file format
(extension: .csv). Since the CVS-formatted data to be saved is a text file, you can analyze
the data using Microsoft Excel.
Step 1. Follow the operation method described below to save the trace data.
•
[Save/Recall] - Save Trace Data
Saving the Display Screen
You can save the screen displayed on the E5061A/E5062A to the disk of the
E5061A/E5062A in Windows bitmap file format (extension: .bmp) or Portable Network
Graphics format (extension: .png).
Step 1. Follow the operation method described below to save the display screen.
• [System] - Dump Screen Image
NOTE
The image on the LCD display memorized in the volatile memory (clipboard) (the image
on the LCD display when the
Chapter 3
Measurement Example of a Bandpass Filter
key is pressed) is saved.
[Capture] ([System])
Quick Start Guide
59