Verifying Parameter Changes: Verify Menu - YASKAWA V1000 Series Installation & Start-Up Manual

4.2 Using the Digital LED Operator
◆

Verifying Parameter Changes: Verify Menu

The Verify Menu lists edited parameters from the Programming Mode or as a result
of Auto-Tuning. The Verify Menu helps determine which settings have been
changed, and is particularly useful when replacing a drive. If no settings have been
changed and all parameters remain at the original default settings, then the Verify
Menu will read
edited parameters.
Note: The Verify Menu will not display parameters from the A1 group (except for A1-02)
even if those parameters have been changed from default settings.
The example below is continued from page 111. Here, parameter C1-01 is accessed
using the Verify Menu and is changed again to 30.0 s.
To check the list of edited parameters:
1. Turn on the power to the drive. The initial display appears.
2.
Press until the display reads, "Verify."
Press to enter the list of parameters that have been edited
3.
from their original default settings.
4.
Scroll through the list by pressing the
Press the
5.
(number furthest to the left flashes)
Press the
6.
(0 flashes)
The next step explains editing a parameter in this list.
Press the
7.
20.0 s
8. Press s until "0030.0" appears.
114
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
. The Verify menu also allows users to access and re-edit
Step
key until C1-01 appears.
key to access the setting value.
key to edit the flashing display.
⇒
⇒
⇒
key.
⇒
⇒
⇒
⇒
Display/Result