YASKAWA V1000 Series Installation & Start-Up Manual page 311

Figure 7.16
A – Line up the tab with the
mounting hole.
Note: Gently pack wires to fit behind the left and right side of the cover into the provided
recess.
5.
Connect the lead from the drive ground terminal to the same terminal as
the option card lead.
The option card lead should exit through the holes provided on the
underside of the drive as it gets routed passed the ground terminal.
Figure 7.17
A – Drive ground terminal
B – Route the lead wire on the
inside of the lower cover.
C – Ground lead
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
A
Figure 7.16 Attach Option Card
E
D
C
Figure 7.17 Lead Wire Connection
7.6 Connecting an Option Card
B
B – Line up the tab with the
mounting hole.
A
B
D – Ground lead through-hole
E – Ground lead
7
311