YASKAWA V1000 Series Installation & Start-Up Manual page 54

3.1 Section Safety
• Do not use an improper voltage source.
Failure to comply could result in death or serious injury by fire.
Verify that the rated voltage of the drive matches the voltage of the
incoming power supply before applying power.
• Do not use improper combustible materials.
Failure to comply could result in death or serious injury by fire.
Attach the drive to metal or other noncombustible material.
Do not carry the drive by the front cover.
Failure to comply may result in minor or moderate injury from the
main body of the drive falling.
• Observe proper electrostatic discharge procedures (ESD)
when handling the drive and circuit boards.
Failure to comply may result in ESD damage to the drive circuitry.
• Never connect or disconnect the motor from the drive while
the drive is outputting voltage.
Improper equipment sequencing could result in damage to the
drive.
54
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
WARNING
CAUTION
Crush Hazard
NOTICE