The Drive And Programming Modes - YASKAWA V1000 Series Installation & Start-Up Manual

4.2 Using the Digital LED Operator
◆

The Drive and Programming Modes

The drive functions are divided into two main groups accessible via the Digital
LED Operator:
Drive Mode: Functions of the Drive Mode allow motor operation and monitoring
of parameters. Parameter settings cannot be changed when accessing functions in
the Drive mode (Table
Programming Mode: Functions of the Programming Mode allow access to setup/
adjust, verify parameters and Auto-Tuning. The drive prohibits changes in motor
operation such as start/stop when the Digital LED Operator is accessing a function
in the Programming Mode.
the "Up arrow" is scrolled immediately after powering up the drive.
Mode Group
Drive Mode Functions (Motor
operation
and monitoring)
Programming Mode
Functions
(Changing parameters)
108
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
4.3).
Table 4.3 illustrates the different functions visible as
Table 4.3 Programming Modes
Description
Frequency Reference Display
(Initial power-up state)
Forward/Reverse
Output Frequency Display
Output Current Display
Output Voltage Reference
Monitor Display
Verify Function
Setup Group Parameters
All Parameters
Auto-Tuning
Key Press LED Digital Operator Display