YASKAWA V1000 Series Installation & Start-Up Manual page 415

Hide thumbs Also See for V1000 Series:
Table of Contents

Advertisement

No.
Name
Accumulated
U4-01
Operation Time
Number of Run
U4-02
Commands
Cooling Fan
U4-03
Operation Time
Capacitor
U4-05
Maintenance
U4-07 IGBT Maintenance
U4-09 LED Check
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
Description
U4: Maintenance Monitors
Use U4 parameters to display drive maintenance information.
Displays the cumulative operation time of the
drive. The default value for the cumulative
operation time of the drive is set to parameter
o4-01. Use parameter o4-02 to determine if
the operation time should start as soon as the
power is switched on or only while the run
command is present. The maximum number
displayed is 65535, after which the value is
reset to 0.
Displays the number of times the run
command is entered. Reset the number of run
commands using parameter o4-13. A
maximum of 65535 run commands are
counted, after which the value is reset to 0.
Displays the cumulative operation time of the
cooling fan. The default value for the fan
operation time is set to parameter o4-03. Can
be set up to 65535. This value will reset to 0
and start counting again after reaching 65535.
Displays electrolytic capacitor usage time in
the main circuit and the control circuit as a
percent of their expected performance life.
One of the multi-function contact outputs can
be set to close when the value reaches 90%
(H2-
= 2F), triggering an alarm.
Parameter o4-06 resets this monitor.
Displays IGBT usage time as a percent of
expected performance life. One of the multi-
function contact outputs can be set to close
when the value reaches 50% (H2-
triggering an alarm. One of the multi-
function contact outputs can be set to close
when the value reaches 90% (H2-
triggering an alarm. Parameter o4-09 resets
this monitor.
Lights all segments of the LED to verify that
the display is working properly.
B.2 Parameter Table
Range
Def.
No signal
1H A A A
output avail.
1H A A A
1% A A A
= 2F),
No signal
output avail.
= 10),
Control
Mode
Addr.
O
V/
P
Hex
L
f
M
V
4C
A A A
76
67
7C
B
A A A 7D7
A A A
3C
415

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents