YASKAWA V1000 Series Installation & Start-Up Manual page 373

H1-
Function
Setting
7B KEB Ride-Thru 2 (N.O.)
7C Short-Circuit Braking (N.O.)
7D Short-Circuit Braking (N.C.)
Forward/Reverse Detection
7E
(for Simple V/f w/PG)
No. Name
Use H2 parameters to assign functions to the multi-function digital outputs.
Terminal MA, MB and MC
H2-01
Function Selection (relay)
Terminal P1 Function Selection
H2-02
(open-collector)
Terminal P2 Function Selection
H2-03
(open-collector)
H2-06 Watt Hour Output Unit Selection
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
H1 Multi-Function Digital Input Selections
Closed: KEB deceleration at momentary power loss
command 2 (N.O. contact)
Enabled only when using PM Open Loop Vector (PM).
Open: Normal operation
Closed: Short-Circuit Braking
Direction of rotation detection (for Simple V/f w/PG)
Description
H2: Multi-Function Digital Outputs
Refer to "Multi-Function Digital
Output Selection Table" for a
description of setting values.
Sets the display units for one of the
multi-function output terminals that
is assigned to output the watt hours
(H2- = 39) is the value every
200 ms. An output pulse of 200 ms
is provided for every kWh that
occurs. Intended to drive a counter,
meter or PLC for logging kWh.
0: 0.1 kWh units
1: 1 kWh units
2: 10 kWh units
3: 100 kWh units
4: 1000 kWh units
B . 2 P a r a m e t e r T a b l e
Description
Range Def.
0 to 192
0 to 4
Control
Mode
Pg.
V/ O P
f LV M
O O O —
- - O —
- - O —
O - - —
Control
Mode
Addr. Pg.
O
V/ P
Hex
L
f M
V
E A A A 40B —
0 A A A 40C —
2 A A A 40D —
0 A A A 437 —
373
B