YASKAWA V1000 Series Installation & Start-Up Manual page 55

• Do not use unshielded cable for control wiring.
Failure to comply may cause electrical interference resulting in
poor system performance. Use shielded, twisted-pair wires and
ground the shield to the ground terminal of the drive.
• Do not allow unqualified personnel to use the product.
Failure to comply could result in damage to the drive or braking
circuit.
Carefully review instruction manual TOBPC72060000 when
connecting a braking option to the drive.
• Do not modify the drive circuitry.
Failure to comply could result in damage to the drive and will void
warranty.
Yaskawa is not responsible for any modification of the product
made by the user. This product must not be modified.
• Check all the wiring to ensure that all connections are correct
after installing the drive and connecting any other devices.
Failure to comply could result in damage to the drive.
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
NOTICE
3.1 Section Safety
3
55