YASKAWA V1000 Series Installation & Start-Up Manual page 286

6.5 Drive Replacement
Figure 6.11
Figure 6.11 Remove the Terminal Cover on a NEMA Type 1 Drive
6.
Loosen the two screws attaching the conduit bracket
remove the conduit bracket.
Figure 6.12
Figure 6.12 Remove the Conduit Bracket on a NEMA Type 1 Drive
7.
Remove the mounting screws from the heatsink and reinstall the drive.
Once the drive is replaced, follow the procedure in reverse order to
reinstall the cover and terminal board.
286
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
A
A
B
(Figure 6.12, A) to