Flowchart E: Using Application-Specific Presets - YASKAWA V1000 Series Installation & Start-Up Manual

◆

Flowchart E: Using Application-Specific Presets

Selecting "pump" or "conveyor" sets up a series of parameters used for those
specified applications so the drive can begin operating immediately. Parameter
settings differ based on the application selected.
Figure 4.10
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
Perform installation, start-up and auto-tuning according to
Chapters 1,2,3 and 4.
Set the application for the drive in parameter A1-06.
Run the motor without the load.
Connect the load and run the motor.
Adjust and fine-tune parameter settings.
The drive is ready to run the application after
all remaining start-up procedures are performed.
Figure 4.10 Application-Specific Presets
4.3 Start-up Flowcharts
START
4
123