YASKAWA V1000 Series Installation & Start-Up Manual page 18

i.2 General Safety
Do not carry the drive by the front cover.
Failure to comply may result in minor or moderate injury from the
main body of the drive falling.
Observe proper electrostatic discharge procedures (ESD) when
handling the drive and circuit boards.
Failure to comply may result in ESD damage to the drive circuitry.
Never connect or disconnect the motor from the drive while the
drive is outputting voltage.
Improper equipment sequencing could result in damage to the
drive.
Do not perform a withstand voltage test on any part of the
drive.
Failure to comply could result in damage to the sensitive devices
within the drive.
18
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
CAUTION
Crush Hazard
NOTICE