Connecting The Option Card - YASKAWA V1000 Series Installation & Start-Up Manual

7.6 Connecting an Option Card
◆

Connecting the Option Card

1.
Loosen the screw on the front cover of the drive to remove the cover.
Figure 7.14
2.
Remove the terminal cover. Connect the lead from the option card to the
drive ground terminal.
Figure 7.15
A – Ground terminal
B – Ground lead
3.
Reattach the terminal cover.
4.
Attach the option card to the drive.
310
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
Figure 7.14 Remove Cover
C
Figure 7.15 Connect Lead
A
B
C – Terminal cover