YASKAWA V1000 Series Installation & Start-Up Manual page 139

Figure 4.19
Run Command
Output Frequency
DC Injection Braking
Motor Speed
DC Injection Braking Time
b2-04 10
b2-04
Note: Extend the baseblock time (L2-03) if overcurrent (OC) occurs when the stop
command is input.
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
ON
10%
Figure 4.19 DC Injection Braking to Stop
4.4 Basic Parameter Adjustments
OFF
Minimum Baseblock Time (L2-03)
DC Injection Braking
Time at Stop
Current (b2-02)
(b2-04)
Output frequency when
stop command was entered
100%
(Max Output Frequency)
DC Braking
139
4