YASKAWA V1000 Series Installation & Start-Up Manual page 66

3.5 Protective Covers
2.
Loosen the screw on the terminal cover
terminal cover and expose the conduit bracket
Figure 3.12
Figure 3.12 Remove the Terminal Cover on an IP20/NEMA Type 1 Drive
3.
Loosen the two screws attaching the conduit bracket
remove the conduit bracket.
Figure 3.13
Figure 3.13 Remove the Conduit Bracket on an IP20/Open-Chassis Drive
66
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
A
(Figure 3.12, B) to remove the
(Figure
A
B
(Figure
3.12, A).
3.13, A) to