YASKAWA V1000 Series Installation & Start-Up Manual page 111

Drive Mode Details
■
The following actions are possible in the Drive Mode:
• Run and stop the drive.
• Monitor the operation status of the drive (frequency reference, output frequency,
output current, output voltage, etc.).
• View information on an alarm.
• View a history of alarms that have occurred.
Figure 4.4 illustrates changing the default frequency reference of F 0.00 (0 Hz) to
F 6.00 (6 Hz). This example assumes the drive is set to LOCAL.
Figure 4.4
Frequency reference
display at power up
STOP
Press until the frequency
reference becomes 6 Hz
Programming Mode Details
■
The following actions are possible in the programming mode:
• Verify Function: Verify changes to parameter settings from original default
values.
• Setup Group: Access a list of commonly used parameters to simplify setup.
• Parameter Setting Mode: Access and edit all parameter settings.
• Auto-Tuning: Automatically measures motor characteristics and programs the
appropriate settings.
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
Press to select LOCAL
Figure 4.4 Drive Mode Setting Example
4.2 Using the Digital LED Operator
Press to select the
digit to the right
4
111