Fault Trace - YASKAWA V1000 Series Installation & Start-Up Manual

5.9 Using Fault Trace Monitors
◆

Fault Trace

The following example illustrates how to view drive data after the drive detects an
overcurrent fault:
1. Turn on the drive input power. The first screen displays.
2.
Press until the monitor screen is displayed.
3.
Press to display the parameter setting screen.
4.
Press until U2-02 (Fault History) is displayed.
Press to view the fault that has just occurred. In this
5.
example, the fault is overcurrent.
Press to view information about the drive status when the
6.
fault occurred.
Monitor parameters U2-03 through U2-17 are helpful in determining
7.
what caused the fault.
246
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
Step Display/Result
⇒
STOP
⇒
⇒
⇒
⇒
⇒