Verifying Parameter Changes: Verify Menu; Yaskawa Electric Siep C710616 31B Yaskawa Ac Drive - A1000 Technical Manual - YASKAWA AC Drive-A1000 Technical Manual

u

Verifying Parameter Changes: Verify Menu

The Verify Menu lists edited parameters from the Programming Mode or as a result of Auto-Tuning. The Verify Menu helps
determine which settings have been changed, and is particularly useful when replacing a drive. If no settings have been changed,
the Verify Menu will read "None". The Verify Menu also allows users to quickly access and re-edit any parameter settings
that have been changed.
Note: The Verify Menu will not display parameters from the A1 group (except for A1-02) even if those parameters have been changed from their
default settings.
The following example is a continuation of the steps above. Here, parameter C1-02 is accessed using the Verify Menu, and
is changed again from 10.0 s to 20.0 s.
To check the list of edited parameters:
1. Turn on the power to the drive. The initial display appears.
2.
Press or until the display shows the top of the Verify Menu.
Press to enter the list of parameters that have been edited from their original default
settings.
3.
If parameters other than C1-02 have been changed, use
appears.
4.
Press to access the setting value. Left digit flashes.
YASKAWA ELECTRIC SIEP C710616 31B YASKAWA AC Drive – A1000 Technical Manual
Step
or to scroll until C1-02
4.3 The Drive and Programming Modes
Display/Result
- MODE -
FREF (OPR)
U1-01= 0 00Hz
U1-02= 0 00Hz
U1-03= 0 00 A
JOG
- MODE -
Modified Consts
X Parameters
HELP
- VER FY - PRG
Accel Time 1
C1-02
(0.0~6000.0)
Home
- VER FY - PRG
Accel Time 1
C1-01=0020.0sec
(0.0~6000.0)
Home
DRV Rdy
LSEQ
LREF
FWD FWD/REV
PRG
Modified
FWD DATA
Rdy
= 20 0sec
"10.0sec"
FWD DATA
Rdy
"10 0sec"
FWD DATA
4
87