4.3 Start-Up Flowcharts - YASKAWA V1000 Series Installation & Start-Up Manual

4.3 Start-up Flowcharts

4.3 Start-up Flowcharts
The flowcharts in this section summarize basic steps required to start-up the drive.
Use the flowcharts to determine the most appropriate start-up method for a given
application. The charts are intended as a quick reference to help familiarize the user
with start-up procedures.
perform all checks to ensure a proper drive start-up.
Flowchart
A Basic start-up sequence for drive operation.
B V/f Motor Control Set-Up
Operation in Open Loop Vector Control (OLV) (high performance and high precision
C
operation without an encoder).
Operate a permanent magnet (PM) motor in OLV Control (compatible with both IPM and
D
SPM motors).
E Set-up of drive using application specific selections.
118
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
Refer to Basic Parameter Adjustments on page 124
Objective
and
Page
119
120
121
122
123