Verifying Parameter Changes: Verify Menu - YASKAWA T1000V Technical Manual

4.3 The Drive and Programming Modes
4.
Scroll through parameters by pressing the
5.
Press to view the current setting value (10.0). (Number farthest to the left flashes)
6.
Press until the desired number is selected. ("1" flashes)
7.
Press the key and enter 0020.0.
8.
Press and the drive will confirm the change.
9. The display automatically returns to the screen shown in Step 4.
10. Press the
key until back at the initial display.

◆ Verifying Parameter Changes: Verify Menu

Any parameters setting that have been changed from their original default values by the user or by the Auto-Tuning
process are listed in the Verify Menu. The Verify Menu helps determine which settings have been changed, and is
particularly useful when replacing a drive. If no settings have been changed the Verify Menu will read
Verify menu also allows users to access and re-edit edited parameters.
Note: The Verify Menu will not display parameters from the A1 group (except for A1-02) even if those parameters have been changed
from default settings.
The following example is a continuation of the steps beginning on page 81. Here, parameter C1-01 is accessed using the
Verify Menu and is changed again to 20.0 s.
To check the list of edited parameters:
1. Turn on the power to the drive. The initial display appears.
2.
Press until the display shows the "Verify" representation.
Press to enter the list of parameters that have been edited from their original
3. default settings.
Scroll through the list by pressing the
4.
Press the key until C1-01 appears.
5.
Press the key to access the setting value. (number farthest to the left flashes)
82
Step
key until C1-01 appears.
Step
key.
YASKAWA ELECTRIC SIEP C710606 44B YASKAWA AC Drive T1000V Technical Manual
Display/Result
. The
Display/Result