YASKAWA V1000 Series Installation & Start-Up Manual page 106

4.2 Using the Digital LED Operator
Figure 4.1
flashing
quick
flashing
Figure 4.2
drive output frequency
/
frequency setting
RUN LED
Note: A RUN light flashing in short intervals can have one of the following meanings:
1. One of the digital input terminals is set to "Drive Enable"
(H1- = "6A"), and that input is open (i.e., shut off).
2. The run command must be provided from an external source. As a default, the
drive does not issue a run command when the power is switched on (b1-17 = "0")
106
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
1 s
ON
ON ON
Figure 4.1 RUN LED Status and Meaning
RUN
during stop
6 Hz
0 Hz
OFF
Figure 4.2 RUN LED and Drive Operation
ON
ON ON
STOP
ON
RUN
ON
Flashing
STOP
OFF