Honda NSX-T 1998 Manual page 855

Main Menu
Bearing Outer Race
Replacement (Clutch Housing Side)
NOTE:
• The outer race and bearing should be replaced as a
set.
• Inspect and adjust the bearing preload whenever the
bearing is replaced.
1. Remove the bearing outer race, 90 mm washer, and
oil guide ring using the special tools.
DRIVER
07749-0010000
2. Install the oil guide ring and 90
drive the outer race into the clutch housing using
the special tools.
DRIVER
07749-0010000
Table of Contents
ATTACHMENT,
62 x 68 mm
07746-0010500
mm washer, then
BEARING DRIVER
ATTACHMENT
07GAD-SD40101