Honda NSX-T 1998 Manual page 1153

Table of Contents
Main Menu
Roof
- Lock Receivers Adjustment
NOTE: This adjustment should be done in the following
order after removing or replacing the lock receiver.
1. Loosen the lock receiver mounting bolts at each of
the four corners, then tighten them lightly.
Front:
FRONT LOCK
RECEIVER
Rear:
2. Install the roof on the body.
CAUTION: When installing the roof, make sure
both roof side locks are unlocked.
NOTE:
• Make sure each roof side hook aligns with the
hook stop properly.
• Before securing the roof by turning each roof
side lock handle, check that the roof side retainer
aligns against the front pillar retainer and rear
pillar panel evenly at each side, and check that
the seals fit flush.
REAR LOCK
RECEIVER