Table of Contents
Advertisement
Main Menu
Roof
Roof Side Lock Unit Replacement
(cont'd)
6.
If necessary, remove the roof side hook.
ROOF SIDE
HOOK
7.
Installation is the reverse of the removal procedure.
NOTE:
• Grease the location indicated by the arrow and
the lock pins.
• Make sure the roof side lock works smoothly.
• Install the roof side retainer and roof side seal
properly as described on page 20-85.
• Before installing the roof trim, install the roof on
the body, then check that the seals fit flush (see
page 20-107).
If necessary, align the roof side seals by adjust-
ing the roof side lock unit (see page 20-106).
• Check that the door glass contacts the seals
evenly (see page 20-109).
• Check for water leaks (see page 20-110).
Table of Contents
ROOF SIDE
LOCK UNIT
Advertisement
Chapters
Table of Contents
