Table of Contents
Advertisement
Main Menu
Thickness and Parallelism
Inspection
1.
Raise both sides of the vehicle, and support it on
safety stands (see page
Remove the rear wheels.
2.
Move the caliper and pads out of the way as
described on the preceding page.
3.
Using a micrometer, measure disc thickness at
eight points, approximately 45° apart and 10 mm
(0.4 in) in from the outer edge of the disc.
Brake Disc Thickness:
Standard:
23.0 mm (0.91 in) max.
Service Limit: 21.0 mm (0.83 in)
Brake Disc Parallelism:
The difference between any thickness measure-
ments should not be more than 0.015 mm (0.0006
in).
4.
If the brake disc is beyond the limits parallelism,
refinish the disc.
Max. Refinishing Limit: 19.0 mm (0.75 in)
Table of Contents
1-10
through 1-12).
Advertisement
Chapters
Table of Contents
