Honda NSX-T 1998 Manual page 1244

Main Menu
Installation:
1. Connect the connectors to the under-dash fuse
box.
NOTE: To reinstall the SRS main harness connec-
tor, push it into position until it clicks, then close
the connector lid.
2. Install the under-dash fuse box.
3. Install the side sill trim, fuse box door and door sill
pad.
SIDE SILL PAD
SIDE SILL TRIM
4. Connect both the negative cable and positive cable
to the battery.
5. Confirm that all systems work properly.
Table of Contents
FUSE BOX
DOOR