Table of Contents
Advertisement
Main Menu
Roof
Lock Receivers Replacement
1.
Remove the roof.
2.
Remove the front and rear roof rail trim (see page
20-79).
3.
Disconnect the connector, and detach the harness
clip (rear lock receiver). Remove the bolts, then
remove the front and rear lock receivers.
4.
Installation is the reverse of the removal procedure.
NOTE:
•
Make sure the connector is connected properly.
•
Adjust the lock receivers alignment.
Bolt locations, 8
Front:
Rear:
CONNECTOR
Table of Contents
FRONT LOCK
RECEIVER
REAR LOCK
RECEIVER
HARNESS
CLIP
Advertisement
Chapters
Table of Contents
