Honda NSX-T 1998 Manual page 742

Main Menu
2. 2nd Gear
The flow of fluid to the 1-2 and 2-3 shift valves is the same as in 1st gear. As the speed of the vehicle reaches the pre-
scribed value, solenoid valve A is turned ON by the TCM. As a result, the 1-2 shift valve is moved to the left side and
uncovers the port leading to the 2nd clutch, and the 2nd clutch is engaged.
Fluid flows by way of:
Hydraulic pressure also flows to the 1st clutch. However no power is transmitted through of the one-way clutch.
NOTE: When used, "left" or "right" indicates direction on the hydraulic circuit.
Table of Contents