Honda NSX-T 1998 Manual page 971

Main Menu
Knuckle/Control Arms
Removal
1 7. Remove the lower control arm by removing the ad-
justing bolt and flange bolt.
Corrosion resistant bolt/nut
SELF-LOCKING NUT
14 x 1.5 mm
Replace.
123 N-m (12.5 kgf-m, 90 Ibf-ft)
18. Remove the upper control arm by removing the
flange bolts.
FLANGE BOLT
10 x 1.25 mm
59 N-m (6.0 kgf-m, 43 Ibf-ft)
Corrosion resistant bolt/nut
Table of Contents
SELF-LOCKING NUT
14 x 15 mm
Replace.
123 N-m
(12.5 kgf-m, 90 Ibf-ft)
ADJUSTING
CAM
LOWER CONTROL ARM
UPPER CONTROL ARM
19. Remove the toe control arm.
TOE CONTROL ARM
Corrosion resistant bolt/nut
CAUTION: Make sure that the reference marks on
the toe control arm are aligned.
FLANGE BOLT
12 x 1.25 mm
93 N-m
(9.5 kgf-m, 69 Ibf-ft)