Table of Contents
Advertisement
Main Menu
Power Unit
Torque/Inspection
CAUTION:
• Do not attempt to disassemble the power unit except
for those components shown in this illustration.
• Do not spill brake fluid on the vehicle; it may damage
the paint; if brake fluid does contact the paint, wash
it off immediately with water.
• To prevent spills, cover the hose joints with rags or
shop towels.
• Clean all parts in brake fluid and air dry; blow out all
passages with compressed air.
Table of Contents
• Before reassembling, check that all parts are free of
dust and other foreign particles.
• Replace parts with new ones whenever specified to
do so.
• Make sure no dirt or other foreign matter is allowed
to contaminate the brake fluid,
• Do not reuse the drained fluid.
Always use Genuine Honda DOT 3 Brake Fluid.
Using a non-Honda brake fluid can cause corrosion
and decrease the life of the system.
Advertisement
Chapters
Table of Contents
