Table of Contents
Advertisement
Main Menu
Transmission Housing
Removal
1.
Place the clutch housing on two pieces of wood
thick enough to keep the mainshaft from hitting the
workbench.
2.
Remove the back up light switch, neutral position
switch, reverse lockout solenoid, differential speed
sensor and vehicle speed sensor (VSS).
3.
Remove the sealing bolts, springs and steel balls.
4.
Remove the transmission housing attaching bolts in
a crisscross pattern in several steps.
5.
Remove the 36 mm sealing bolt.
Table of Contents
6.
Expand the snap ring on the countershaft ball bear-
ing, and remove it from the groove using a pair of
snap ring plier.
7.
Separate the clutch housing from the transmission
housing.
8.
Remove the thrust shim and oil guide plate from
the transmission housing.
Advertisement
Chapters
Table of Contents
