Honda NSX-T 1998 Manual page 433

Main Menu
Timing Belt
Removal (cont'd)
7. Remove the breather hose and the air cleaner hous-
ing (see page 6-26).
8. Disconnect the alternator connector and the termi-
nal.
9. Remove the cover, adjusting bolt, the mounting bolt
and mounting nut, then remove the alternator belt
and the alternator.
ADJUSTING
BOLT
10. Remove the cylinder head covers.
• Refer to pages 6-49,
11. Remove the two bolts from the side engine mount
near the alternator bracket. Pivot the mounting bracket
into the housing of the body.
Table of Contents
COVER
ALTERNATOR
BELT
6-50 when installing.
12. Remove the transmission mount (see page 5-10).
13. Install a brace under the engine, then tilt the engine
approximately 5° using a jack.
NOTE: Make sure to place a cushion between the
oil pan and the jack.
14. Remove the alternator bracket stiffener and dipstick/
pipe.
ALTERNATOR BRACKET
STIFFENER
DIPSTICK PIPE