Honda NSX-T 1998 Manual page 817

Main Menu Main Menu
Disassembly
1. Remove the snap rings, then remove the clutch end
plate, clutch discs and plates.
2. Remove the disc spring.
NOTE: For 1st-hold and 2nd clutches.
Table of Contents Table of Contents
3. Install the special tools as shown.
CLUTCH SPRING
COMPRESSOR
BOLT ASSEMBLY
07GAE - PG40200
or
07GAE - PG4020A
CAUTION: If either end of the special tool is set
over an area of the spring retainer which is unsup-
ported by the return spring, the retainer may be
damaged. Be sure the special tool is adjusted to
have full contact with the spring retainer.
CLUTCH SPRING
COMPRESSOR
ATTACHMENT
07LAE-PX40100
CLUTCH SPRING
COMPRESSOR
ATTACHMENT
07LAE-PX40100
or
07HAE - PL50100