Honda NSX-T 1998 Manual page 927

Main Menu
NOTE: Before removing the gearbox, place a stand jack
under the gearbox and front crossbeam to lightly sup-
port them. Lower the gearbox together with the front
crossbeam.
18. Remove the flange bolts and nuts of the gearbox
and front crossbeam.
Table of Contents
19. Lower the gearbox and front crossbeam with care
so as not to hit or damage the radiator pipe.
NOTE: The crossbeam is attached to the crossbeam
bracket with locating pins. Remove the crossbeam
by lightly taping on it with a plastic hammer, then
remove the gearbox.
20. When installing the crossbeam to the crossbeam
bracket, be sure to align the holes in the crossbeam
with the locating pins on the crossbeam bracket.