Honda NSX-T 1998 Manual page 1165

Main Menu
Rear Pillar Seal/Retainer
Replacement (cont'd)
11. Peel the separator off from the butyl tape on the new
rear pillar seal.
NOTE: Fold the separator of butyl tape at the roof
portion of the rear pillar seal.
SEPARATOR
Fold it.
REAR PILLAR
SEAL
SEPARATOR
Peel off.
Table of Contents
BUTYL TAPE
BUTYL
TAPE
12. Align the hole and clip on the rear pillar seal with the
grommet and hole on the body, and engage the lips
of the rear pillar seal with the groove of the retainers,
then gently set each corner of the rear pillar seal
down on the sealant as shown.
NOTE: Do not press on the seal yet to make the adhe-
sive stick.
REAR PILLAR
SEAL
CLIP
About 70°
SEALANT
LIP
RETAINER
GROMMET
REAR PILLAR
RETAINER
REAR PILLAR
SEAL