Table of Contents
Advertisement
Main Menu
Doors
Glass Adjustment (cont'd)
10. After the clearances have been adjusted properly,
reinstall the retainers and upper weatherstrip.
11. Reinstall the door trim.
12. With the door and glass closed fully, check that the
glass contacts with the upper weatherstrip evenly.
NOTE: Measuring points are described on page
20-15.
Table of Contents
13. Check for water leaks.
NOTE: Do not use high-pressure water.
14. Install the switch panel in the door panel.
1 5. Install the wire harness in the door.
16. Attach the plastic cover, and install the door panel.
Advertisement
Chapters
Table of Contents
