Table of Contents
Advertisement
Main Menu
Rocker Arms and Shafts
Disassembly/Reassembly
CAUTION: After installing the rocker shaft orifice, try to turn the rocker shaft to make sure that the orifice has been
inserted in the hole of the rocker shaft correctly. If the orifice is in place, it should not turn.
NOTE:
• Identify parts as they are removed to ensure reinstallation in original locations.
• Inspect rocker shafts and rocker arms (see pages
• Rocker arms must be installed in the same position if reused.
• Adjust the rocker arms after torquing the cylinder head bolts.
Prior to reinstalling, clean all the parts in solvent, dry them, and apply lubricant to any contact surfaces.
EXHAUST ROCKER
SHAFT
WASHERS
Replace.
WASHERS
Replace.
Table of Contents
EXHAUST ROCKER ARM ASSEMBLIES
INTAKE ROCKER
SHAFT
INTAKE ROCKER
SHAFT
EXHAUST ROCKER
SHAFT
EXHAUST ROCKER ARM ASSEMBLIES
6-33
and 6-34).
RUBBER BAND
RUBBER BAND
CYLINDER NUMBER
CYLINDER NUMBER
RUBBER BAND
RUBBER BAND
Advertisement
Chapters
Table of Contents
