Table of Contents
Advertisement
Main Menu
Front Suspension
Hub Replacement
3.
Separate the wheel bearing from the hub using the
special tools and a press.
CAUTION: Hold onto the hub to keep it from fall-
ing when pressed clear.
HUB DIS/
ASSEMBLY BASE
07GAF - SD40700
4.
Remove the outboard bearing inner race from the
hub as shown.
INNER RACE
Replace.
NOTE: Wash the bearing and hub thoroughly in
high flash point solvent before reassembly.
Table of Contents
Press
WHEEL
BEARING
Replace.
Press
NOTE: Replace the bearing with a new one after
removal.
5.
Press a new wheel bearing into the hub using the
special tools shown and a press.
HUB ASSEMBLY
DRIVER ATTACHMENT
07GAF - SD40200
Press
6.
Install the pulser.
NOTE: Be sure the pulser engages with the pin on
the spindle.
SUPPORT BASE
07965 - SD90100
PULSER
PIN
Advertisement
Chapters
Table of Contents
