Table of Contents
Advertisement
Main Menu
Transmission Assembly
Installation (cont'd)
27. Install the transmission mount and two transmission
housing mounting bolts.
28. Install the starter motor, and connect the starter
motor cables. Make sure that the crimped side of
the ring terminals facing out (see
29. Install the transmission ground cable and jumper con-
nector, and connect the back-up light switch, ne-
utral position switch, differential speed sensor, reverse
lockout solenoid, and vehicle speed sensor (VSS) con-
nector.
30. Install the control box, and connect the control box
connectors.
Table of Contents
section
23).
31. Install the air cleaner assembly.
32. Install the strut bar.
33. Refill the transmission with the recommended oil
(see page 13-3).
34. Connect the battery positive (+) and negative (-)
cables to the battery.
35. Inspect the rear camber (see
36. Check the clutch operation.
37. Shift the transmission, and check for smooth opera-
tion.
section
18).
Advertisement
Chapters
Table of Contents
