Table of Contents
Advertisement
Main Menu
7. Rotate the crankshaft 120° clockwise (camshaft pulley
turns 60°). Check that the front intake camshaft pulley
is positioned as shown.
Repeat step 3 to step 6.
Number 4 piston at TDC:
8. Rotate the crankshaft 120° clockwise (camshaft pulley
turns 60°). Check that the front intake camshaft pulley
is positioned as shown.
Repeat step 3 to step 6.
Number 2 piston at TDC:
9. Rotate the crankshaft 120° clockwise (camshaft pulley
turns 60°). Check that the front intake camshaft pulley
is positioned as shown.
Repeat step 3 to step 6.
Number 5 piston at TDC:
Table of Contents
10. Rotate the crankshaft 120° clockwise (camshaft pulley
turns 60°). Check that the front intake camshaft pulley
is positioned as shown.
Repeat step 3 to step 6.
Number 3 piston at TDC:
11. Rotate the crankshaft 120° clockwise (camshaft pulley
turns 60°). Check that the front intake camshaft pulley
is positioned as shown.
Repeat step 3 to step 6.
Number 6 piston at TDC:
Advertisement
Chapters
Table of Contents
