Honda NSX-T 1998 Manual page 668

Main Menu
Reverse Shift Arm,
Reverse Shift Fork
Clearance Inspection (cont'd)
5. Measure the clearance between the reverse shift
fork and reverse synchro sleeve.
6. If the clearance exceeds the service limit, measure
the thickness of the shift fork fingers.
If the trickiness is less than the standard, replace the
reverse shift fork with a new one.
If the trickiness is within the standard, replace the
reverse synchro sleeve with a new one.
The synchro sleeve and synchro hub should be
replaced as a set.
Table of Contents