Table of Contents
Advertisement
Main Menu
Engine Removal/Installation
Removal (cont'd)
33. Remove the left and right parking brake cables (see
section
19).
34. Remove the rear beam rod assembly and parking
brake cable clamps.
35. Remove the front engine mount, then remove the
front beam.
Table of Contents
36. Remove the A/C compressor (see
suspend it from the body.
NOTE:
• Do not remove the compressor hoses.
• Do not let the compressor hang by its hoses.
37. Reinstall the front beam and front engine mount.
38. Remove the rear brake hoses, then plug the brake
pipes with rubber caps (see
39. Disconnect the left rear wheel sensor connector,
then remove the wheel sensor wire clamps and sta-
bilizer link.
section
22), then
section
19).
Advertisement
Chapters
Table of Contents
