Honda NSX-T 1998 Manual page 850

Main Menu
Differential
Reassembly
2. Install the carrier assembly.
3. Install the final driven gear. Align the mark on the
differential housing cover with the mark on the final
driven gear.
FINAL DRIVEN GEAR
Table of Contents
CARRIER
ASSEMBLY
DIFFERENTIAL
HOUSING
MARK
MARK
4. Install the washers, thrust needle bearing, and cen-
tral gear.
WASHERS
• 65 mm shim adjustment
5. Clean the gear end surface on the central gear.
6. Set the plastigauge (Blue) strip on the central gear
at four points in a crisscross pattern.
PLASTIGAUGES
CENTRAL GEAR
THRUST NEEDLE
BEARING