Honda NSX-T 1998 Manual page 456

Main Menu
Valves, Valve Springs and Valve Seals
Replacement (cont'd)
3. Install the valve guide seal remover as shown.
VALVE SEAL
SEAL
PULLER
4. Remove the valve guide seal.
Table of Contents
VALVE GUIDE SEAL REMOVER
(Commercially available)
LISLE P/N 57900 or KD3350
VALVE GUIDE SEAL REMOVER
(Commercially available)
LISLE P/N 57900 or KD3350
M/T:
Intake Valve Dimensions
A Standard (New): 35.9 - 36.1 mm
(1.413 - 1.421 in)
B Standard (New): 111.10 - 111.40 mm
(4.374 - 4.386 in)
C Standard (New): 5.475 - 5.485 mm
(0.2156 - 0.2159 in)
C Service Limit: 5.445 mm (0.2144 in)
D Standard (New): 1.05 - 1.35 mm
(0.041 - 0.053 in)
D Service Limit: 0.85 mm (0.033 in)
Exhaust Valve Dimensions
A Standard (New): 29.9 - 30.1 mm
(1.177 - 1.185 in)
B Standard (New): 109.60 - 109.90 mm
(4.315 - 4.327 in)
C Standard (New): 5.45 - 5.46 mm
(0.2146 - 0.2150 in)
C Service Limit: 5.42 mm (0.2134 in)
D Standard (New): 1.65 - 1.95 mm
(0.065 - 0.077 in)
D Service Limit: 1.45 mm (0.057 in)