Table of Contents
Advertisement
Main Menu
Transmission
Reassembly (cont'd)
2.
Assemble the transmission housing in the following numbered sequence.
NOTE: See page
Table of Contents
14-159
when installing the reverse idler gear.
NOTE: Install the three shafts
together.
NOTE: Align the control
shaft spring pin with the
groove in the transmission
housing.
NOTE: Torque the bolts to 54 N-m
(5.5 kgf-m, 40 Ibf-ft) in the numbered
sequence
in two or more
steps.
Advertisement
Chapters
Table of Contents
