Honda NSX-T 1998 Manual page 1103

Main Menu
Seat Belts
Replacement (cont'd)
Anchor bolt construction:
* UPPER ANCHOR BOLT
SPRING WASHER
* CENTER ANCHOR BOLT
3. Check that the retractor locking mechanism functions as described on page 20-45.
4. Installation is the reverse of the removal procedure.
NOTE:
• Make sure you assemble the washers on the anchor bolts as shown.
• Before attaching the center pillar trim panel, make sure there are no twists or kinks in the seat belts.
• On reassembly, replace the anchor bolts (*) and use liquid thread lock.
Table of Contents
TOOTHED
LOCK WASHER
PLAIN
WASHER
BEARING
TOOTHED
LOCK WASHER
SPRING WASHER
TOOTHED
LOCK WASHER
RETRACTOR BOLT
SPRING WASHER
* LOWER ANCHOR BOLT