Table of Contents
Advertisement
Main Menu
EPS Control Unit
Replacement
SRS components are located in this area. Review the
SRS component locations, precautions, and procedures
in the SRS
(section
24) before performing repairs or ser-
vice.
1.
Remove the dashboard lower cover.
2.
Turn up the floor mat, and remove the speaker cover
and speaker.
Table of Contents
3.
Disconnect the connectors from the EPS control
unit, then remove it.
4.
Installation is the reverse of removal procedure.
NOTE: After installation, start the engine and make
sure that the EPS indicator light goes off.
Advertisement
Chapters
Table of Contents
