Honda NSX-T 1998 Manual page 1004

Main Menu
12. Remove the adjusting bolt.
13. Remove the spring cover, adjusting spring B, spacer,
bearing A and cup from the adjusting bolt.
14. Remove the sleeve piston, and remove the pin from
the cam.
Table of Contents
15. Remove the return spring.
16. Remove the parking lever and cam as an assembly
from the caliper body.
CAUTION: Do not loosen the parking nut with the
cam installed in the caliper body. If the lever and
shaft must be separated, hold the lever in a vise
and loosen the parking nut.
17. Remove the cam boot.