Honda NSX-T 1998 Manual page 447

Main Menu
Cylinder Heads
Removal (cont'd)
38. Remove the front and rear back covers.
REAR BACK
COVER
FRONT BACK
COVER
39. Loosen the rocker arm locknuts and the adjusting
screws.
40. Remove the camshaft holder plates, camshaft holders
and camshafts.
FRONT INTAKE
CAMSHAFT
OIL SEALS
Replace.
Table of Contents
RUBBER SEALS
CAMSHAFT HOLDER
PLATES
FRONT EXHAUST
CAMSHAFT
41. Remove the cylinder head bolts, then remove the
cylinder head.
CAUTION: To prevent warpage, unscrew the bolts
in sequence 1/3 turn at a time; repeat the sequence
until all bolts are loosened.
CYLINDER HEAD BOLTS LOOSENING SEQUENCE
NOTE: Separate the cylinder head from the block
with a flat blade screwdriver as shown.
42. Remove the front and rear exhaust manifolds (A/T
see page 9-5).